Ikon – 60" Thermostatic Countertop Gas Griddle | ITG-60
Secure Payment Options
Ask an Expert
Couldn't load pickup availability
60-Inch Thermostatic Gas Griddle for High-Volume Flat-Top Cooking
The Ikon ITG-60 is a 60-inch countertop gas griddle with a 1-inch thick polished steel plate. Five 30,000 BTU U-shaped burners heat the plate, and each 12-inch section has its own thermostat, so you can cook different foods at different temperatures on one griddle. It suits busy diners, breakfast spots, burger restaurants and catering kitchens.
Key Features:
- 60 x 20.5 in. cooking surface on a 1-inch thick polished steel plate
- Five 30,000 BTU U-shaped burners, 150,000 BTU in total
- A thermostat for each 12-inch zone, adjustable from 200°F to 450°F (93°C to 232°C)
- Back and side splash guards fully welded to the griddle plate
- Removable 3-1/4 in. grease drawer with a weep hole and baffle
- Runs on natural gas or LP, with a conversion kit in the box
What's Included in the Box:
- Ikon ITG-60 thermostatic gas griddle
- Gas pressure regulator
- Gas conversion kit (natural gas and LP)
- Adjustable stainless steel legs with non-skid feet
The cabinet is all stainless steel with double-wall insulated sides, and the front edge stays cool to the touch. The flue sits at the back, and the griddle can be serviced from the front. Preheat for 20 to 25 minutes before cooking, and empty the grease drawer as needed through the day.
The griddle connects to a 3/4-inch NPT gas line and needs 4 inches W.C. on natural gas or 10 inches W.C. on propane. Install the included regulator before first use. Any gas conversion must be done by an authorized Ikon service agent to protect the warranty.
Set the griddle on a non-combustible counter on its 4-inch legs, or on a 24-inch stand over a combustible floor. From combustible walls, keep 6 inches at the back and sides. From non-combustible walls, 0 inches is fine. Vent it under a hood, with at least 18 inches between the flue and the hood filters. The spec sheet, installation and operation manual, parts list and warranty terms are free PDF downloads on this page.
At a glance
- Gas Natural gas or LP (conversion kit included)Connection: 3/4 in. NPTPressure: 4 in. W.C. NG / 10 in. W.C. LPInput: 150,000 BTU/hr
- Installation Non-combustible counter on 4 in. legs, or 24 in. stand on a combustible floorClearances: Combustible: 6 in. back and sides. Non-combustible: 0 in.
| Model | ITG-60 |
| Width | 60 in. (152.4 cm) |
| Depth | 34.4 in. (87.3 cm), including the regulator |
| Height | 15.5 in. (39.4 cm) |
| Net Weight | 308 lb (140 kg) |
| Shipping Weight | 372 lb (169 kg) |
| Cooking Surface | 60 x 20.5 in. |
| Griddle Plate | 1 in. thick polished steel |
| Burners | 5 U-shaped, 30,000 BTU each |
| Total BTU | 150,000 BTU/hr |
| Temperature | 200°F to 450°F (93°C to 232°C) |
| Controls | Thermostat for each 12 in. zone |
| Fuel | Natural gas or LP (conversion kit included) |
| Gas Connection | 3/4 in. NPT |
| Gas Pressure | 4 in. W.C. NG / 10 in. W.C. LP |
| Regulator | Included, preset for natural gas |
| Pilots | Standing pilots with safety valves |
| Grease Drawer | 3-1/4 in., removable, with weep hole and baffle |
| Splash Guards | Back and sides, welded to the plate |
| Construction | Stainless steel cabinet, double-wall insulated sides |
| Front Edge | Cool to the touch |
| Legs | Adjustable stainless steel, non-skid feet |
| Footprint | 59.5 x 21 in. (151.1 x 53.4 cm) |
| Installation | Non-combustible counter on 4 in. legs, or 24 in. stand on a combustible floor |
| Clearances | Combustible: 6 in. back and sides. Non-combustible: 0 in. |
| Venting | 18 in. from flue to hood filters |
| Shipping Size | 64.8 x 36.2 x 19.3 in. (165 x 92 x 49 cm) |
1-Year Manufacturer Warranty
The Ikon ITG-60 is backed by MVP Group Corporation's factory warranty against defects in material and workmanship.
- Coverage Period: One (1) year parts and labor from the date of original purchase. Factory time limits based on the shipment date also apply.
- What's Covered: Repair or replacement of defective parts and assemblies under normal commercial use and proper maintenance, for units installed in Canada, including labor and travel within 100 miles (160 km) round trip.
- What's Not Covered: Normal wear and tear, improper installation, lack of basic maintenance, misuse, accidents and shipping damage. Coverage is for the original purchaser only.
- Getting Service: Contact intoCooking Inc. at info@intocooking.ca or 1 (888) 583-3477 with your model number, serial number and proof of purchase. We will help you start your claim with MVP Group.
Certain conditions apply, including proper installation and maintenance. Any gas conversion must be done by an authorized Ikon service agent to keep the warranty valid.
- Free Shipping: We offer free standard delivery across Canada. There are no hidden fees, and only applicable taxes are added at checkout.
- Delivery Time: Your order arrives in 2–8 business days in total: 1–3 business days to pack it and 1–5 business days in transit.
- Carefully Packaged: Every order is securely packaged and handled with care to ensure it arrives safely at your doorstep or business location.
- Tracking Included: A tracking number will be emailed to you as soon as your order is fulfilled and dispatches from the warehouse.
For full shipping details, please review our complete Shipping Policy.